AGRINOL MP OIL FOR ROLLING MILLS TS U 23.2-30802090-050:2006
The oil is designed for flushing lubrication systems of automobile engines without disassembling them, while changing engine oil.
Flushing liquid Agrinol MPT-2m TS U 23.2-30802090-080:2008
Flushing liquid Agrinol MPT-2M is used for flushing lubrication systems of diesel engines (diesel, marine, automotive, road and construction equipment, etc.), as well as for gasoline engine cars and trucks without their disassembly (while replacing fluid).
| Index name |
Agrinol MP |
Agrinol MPT-2m |
| Kinematic viscosity at 50 °С, mm² / s |
9 – 12 |
18 – 22 |
Temperature, °С:
Flash point in an open crucible, not lower than
Pour point, not higher than |
140
– 40 |
160
– 15 |
Fraction of total mass, %, not more than:
Mechanical impurities
water
sulfated ash |
0,01
Traces
1,2 |
0,015
Traces
0,5 |
Fraction of total mass of active elements, %, not less than:
calcium
zink |
0,2
0,1 |
–
– |
Tribological characteristics on Four-ball machine at (20 ± 5) °С:
deterioration index (196 Н), mm, not more than
welding loading
scuff index |
0,4
–
– |
–
2067
398 |
Oil divider – Form Divider TS U 24.6-30802090-106:2008
Form Divider oils are used as a divider in continuous casting machines for rolled metal, as well as the manufacture of multi-faceted profiles by continuous casting.
| Index name |
Form Divider |
Kinematic viscosity, mm² / s:
at 40 °С
at 100 °С, not less than |
45 – 65
7,5 |
| Acid number, mg КОН / g, not more than |
0,5 |
Temperature, °С:
flash point in an open crucibleв, not lower than
pour point, not higher than |
230
– 12 |
Fraction of total mass, %, not more than:
mechanical impurities
water
sulphur |
0,015
Traces
1,0 |
| Colour, units of CNT, not more than |
5 |
| Coking ability, %, not more than |
0,15 |
| Saponification number, mg КОН / g, not more than |
50 – 65 |
| Density at 20 °С, kg / m³, not more than |
900 |
Instrumental Oil MVP All-Union State Standard 1805-76
Mineral instrumental oil MVP of sulfuric purification is intended for lubricating of test instruments at temperatures from minus 60 °C to 110 °C, for filling the oil-pneumatic shock absorbers and in the process of lubricants manufacture.
| Index name |
MVP |
| Kinematic viscosity at 50 °С, mm² / s |
6,5 – 8,0 |
| Acid number, mg КОН / g, not more than |
0,03 |
Temperature, °С:
flash point in an open crucible, not lower t han
pour point, not higher than |
125
– 60 |
Fraction of total mass, %, not more than:
mechanical impurities
water
water-soluble acids and alkalis |
None
None
None |
| Ash, %, not more than |
0,005 |
| Colour, units of CNT, not more than |
1,5 |
| Density at 20 °С, kg / m³, not more than |
900 |
Air filter oil (Viscin oil) All-Unions State Standard 7611-75
Air filter oil (viscin oil) is used to absorb the dust from the air.
| Index name |
Viscin oil |
| Kinematic viscosity at 50 °С, mm² / s |
19 – 24 |
| The ratio of kinematic viscosity at 20 °C to kinematic viscosity at 50 °C, not more than |
4,5 |
Temperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
165
– 20 |
Fraction of total mass, %, not more than:
water
water-soluble acids and alkalis |
Traces
None |
| Ash, %, not more than |
0,015 |
| Coking ability, % |
0,3 – 0,8 |
|
|
Conservative oil К-17 All-Union State Standard 10877-76
Conservative oil K-17 (oil K-17) is used for long-term protection from atmospheric corrosion of products of ferrous and nonferrous metals, as well as for mechanisms that are stored under cover.
Agrinol Gun Lodge TS U 23.2-30802090-111:2009
Oil Agrinol Gun Lodge VO and Agrinol Gun Lodge RG are designed for short-term protection of metal surfaces from corrosion and as working lubricating oils for the unloaded nodes, briefly working at temperatures: Agrinol Gun Lodge VO — above 5 °C, Agrinol Gun Lodge RG — up to minus 50 °C.
Agrinol Gun Lodge RG is also used for cleaning surfaces from fouling.
| Index name |
Agrinol Gun Lodge VO |
Agrinol Gun Lodge RG |
К-17 |
Kinematic viscosity at, mm² / s, not more than:
at 100 °С, not lower than
at 50 °С, not lower than
at minus 50 °С, not more than |
9,0
60,0
– |
–
6,0
1500 |
15,5 – 21,0
–
– |
| Temperature of pour point, °С, not higher than |
– |
At minus 60 |
At minus 22 |
Fraction of total mass, %, not more than:
mechanical impurities
water
free organic acids
free alkali in NaOH equivalent |
0,05
None
–
– |
0,07
None
0,40
0,05 |
| Ash, % |
– |
1,35 – 2,40 |
| Protective properties |
– |
0
(%, surface of corrosion) |
Withstands |
|
|
Agrinol VM
TS U 23.2-30802090-031:2006
Agrinol VМ-1 Oil is used as a working liquid in high-vacuum steamjet pumps BN-3 which work at the residual pressure from 1·10 – 3 to 1·10 – 6 mm of mercury.
Agrinol VМ-3 is used as a working liquid in high-production oil-vapor booster pumps which work at the residual pressure from 1·10 – 2 to 1·10 – 4 mm of mercury.
Agrinol VМ-4 Oil is used as a working liquid in mechanical vacuum pumps with oil seal.
| Index name |
Agrinol VM-1 |
Agrinol VM-3 |
Agrinol VM-4 |
Kinematic viscosity at, mm² / s:
At 50 °С, not more than
at 100 °С |
60 – 70
– |
8 – 11
– |
48 – 57
8 – 11 |
| Acid number, mg КОН / g, not more than |
0,2 |
Temperature, °С:
flash point in an open crucible, not lower than
flash point in close crucible, not lower than
pour point, not higher than |
230
–
– 12 |
150
–
– 12 |
235
205
– 15 |
| Colour, units of CNT, not more than |
0,5 |
3,5 |
7,0 |
Fraction composition of the oil, °С:
IBP, not lower than
90 % oil is distilled over at temperature not higher than
EBP, not higher than |
–
–
– |
95
175
– |
370
–
515 |
| Vapour pressure at 20 °С, Pa, not higher than |
5,3·10 – 6 |
1,33·10 – 2 |
5,3·10 – 3 |
| Density at 20 °С, kg / m³, not higher than |
900 |
890 |
908 |
Agrinol VM TS U 23.2-30802090-031:2006
Vacuum oils Agrinol VМ are used as working liquids for mechanical vacuum pumps.
Agrinol VМ-5 Oil is used as a working liquid in high-vacuum steamjet pumps which work at the residual pressure from 1·10 – 3 to 1·10 – 7 mm of mercury.
Agrinol VМ-6 Oil is used as a lubricating material and seal for piston fore-vacuum pumps which work at the residual pressure up to 1·10 – 3 mm of mercury.
Agrinol VМ-11 Oil is used as a working liquid in high-production oil-vapor booster, auxiliary, steamjet and special fore-vacuum pumps.
| Index name |
Agrinol VM-5 |
Agrinol VM-6 |
Agrinol VM-11 |
Kinematic viscosity, mm² / s:
at20 °С, not more than
at 50 °С, not more than
at 100 °С, not more than |
–
60 – 74
– |
220
40
8 |
–
12,5 – 15,8
– |
| Acid number, mg КОН / g, not more than |
0,2 |
Temperature, °С:
flash point in an open crucible, not lower than
pour point not higher than |
230
– 12 |
216
– 10 |
170
– 12 |
| Colour of CNT, not more than |
0,5 |
4,5 |
0,5 |
Fraction content of the oil, °С:
the temperature of the beginning of distillation, not lower than
90 % of the oil are distilled at the temperature not higher than |
–
– |
125
220 |
80
175 |
| Vapor pressure at 20 °С, Pа, not more than |
2,7·10 – 5 |
4,0·10 – 4 |
6,7·10 – 3 – 1,3·10 – 4 |
| Density at 20 °С, kg / m³, not more than |
900 |
890 |
890 |
|
|
Agrinol AMT-300 TS U 23.2-30802090-090:2008
Agrinol AMT 300 and Agrinol AMT-300T oils are intended for use in closed systems of production as heat-carrying agent, excluding the contact with hot air.
Agrinol AMT-300 oil maximum allowable temperature under intense forced circulation is not more than 280 °C, as for oil Agrinol AMT-300T under intense forced circulation – not more than 300 °C.
| Index name |
Agrinol
АМТ-300 |
Agrinol
АМТ-300Т |
| Kinematic viscosity at 100 °С, mm² / s not more than |
5,9 |
5,3 |
| Acid number, mg КОН / g, not more than |
0,03 |
0,05 |
Temperature, °С:
flash point in an open crucible, not lower than
minimum auto-ignition, not less than
power point, not higher than |
175
285
– 30 |
170
325
– 23 |
Fraction of total mass, %, not more than:
mechanical impurities
water |
None
None |
| Colour, units of CNT, not more than |
6 |
– |
| Refraction index, not less than |
1,54 |
1,58 |
Fraction composition, °С, not more than:
5 % (volume) boils
95 % (volume) boils |
330
475 |
–
– |
| Density at 20 °С, kg / m³, not more than |
960 |
995 |
|
|
|
