CIATIM-205 All-Union State Standard 8551-74
CIATIM-205 is a plastic lubricant intended for capsulation and prevention of caking of immobile screw joints and seals contacting with aggressive media (concentrated non-organic acids, alkalis, amines, alcohol, hydrazines) and working within the temperature range from minus 60 °С up to 50 °С. The minimal temperature of the lubricant’s usage for movable screw joints is minus 20 °С.
Guarantee period of storage — 5 years from the day of manufacture.
VNII NP-279 All-Union State Standard 14296-78
Lubricant VNII NP-279 is intended for greasing rolling and plain bearings, threaded joints, connectors, valves, etc., operating in contact with aggressive media at temperatures ranges from minus 50 °C up to 50 °C and air at temperatures ranges from minus 50 °C up to 150 °С.
| Index name |
CIATIM-205 |
VNII NP-279 |
Meets classifications NLGI
DIN 51502 |
5
К5С-60 |
1
К HC 1 N-50 |
| Thickener |
Organic |
Silica gel |
| Operating temperature, min…max, °С |
– 60 … + 50 |
– 50 … + 50 ( + 150) |
| Dropping Point, °С, not lower than |
65 |
– |
| Penetration at 25 °С, mm·10 – 1 |
165 |
– |
| Proof strength, Pа, not less than |
– |
100 (50 °С) |
| Colloid stability, %, not more than |
4 |
5,2 |
| Efficient viscosity at the average gradient of the strain rate of 10 s–1, not more than |
– |
2300 (30 °С) | |
|
VNII NP-282 А TS U 24.6-30802090-068:2007
VNII NP-282 А and VNII NP-282М А are lubricants intended for sealing and greasing attrition faces of various equipment units functioning at different loading in contact with aggressive media and gaseous oxygen. It is permissible to use lubricants in powerful mechanisms and the armature of oxygen-respiratory devices at the temperature not lower than minus 60 °С. The lubricants possess increased stability against oxygen and the influence of aggressive media (acids, amines, hydrazines). The stability decreases because of a continuous contact with nitric acid and hydrogen peroxide.
| Index name |
VNII NP-282 А |
VNII NP-282М А |
Meets classifications NLGI
DIN 51502 |
3
КFK 3 N-45 |
3
КFK 3 N-45 |
| Thickener |
Non organic |
| Operating temperature, min…max, °С |
– 45 (-60) … + 150 |
| Penetration at 25 °С, мм·10 – 1, not more than |
Not norm |
| Proof strength at 50 °С, Pа |
200 – 700 |
200 |
| Colloid stability, %, not more than |
5 |
10 |
Efficient viscosity, Pа•s:
at 50 °С and at the average gradient of the strain rate of 1000 s–1,
at minus 20 °С and at the average gradient of the strain rate of 10 s–1, not more than
at minus 30 °С and at the average gradient of the strain rate of 10 s–1, not more than |
Not less than 1,6
–
2000 |
Not more than 1,0
1200
– |
| Evaporation at 150 °С within 1hr. %, not more than |
5 |
|
|
|
