Agrinol CNII-KZ Print
Agrinol CNII-KZ  TS U 24.6-30802090-101:2009
Lubricant Agrinol CNII-KZ is intended to protect against ice deposits on trolley and electric rolling contact wires during icing.
The main consumers of lubricants are the enterprises and organizations of railway transport, metro, tram eco­nomy.
Index name Agrinol CNII-KZ
Thickener Li
Operating temperature, min…max, °С – 40 … + 40
Viscosity at 0 °С and medium degree of strain rate 10 с–1, Pа·s, not more than 400
Shear strength, at 20 °С, Pa, not lower than 200
Mass fraction of free organic acids in КОН equivalent, %, not more than 0,2
Water cut, %, not more than None
Fraction mass of mechanical impurities, %, not more than 0,03
Corrosive influence on metals Withstands
 
Agrinol Contact Print
Agrinol Contact  TS U 24.6-30802090-099:2009
Agrinol Contact lubricant is used to grease the lining of joints and rails to ensure stable electric rails joints. Contains graphite. The main consumers of the lubricants are the enterprises and organizations of railway transport, metro, tram economy.
Index name Agrinol Contact
Meets classifications NLGI
DIN 51502		 3
OGF3С-40
Thickener Ca
Operating temperature, min…max, °С – 40 … + 60
Dropping point, °С, not lower than 90
Colloid stability, % allocated oil, not more than 5,0
Water cut, %, not more than 2
Penetration at 25 °С (with mixing (60 double strokes), mm·10 – 1, not more than 240
Corrosive influence on metals Withstands
 
Agrinol GD Print
Agrinol GD         TS U  23.2-30802090-096-2006
Agrinol GD is a firm railway lubricant of A and B brands that are used to grease the finger crank drawbar bearings and engines with variable split bush and other friction units, with recommended temperature range for the lubricants’ usage from minus 30 °С up to 80 °С and eliminate the possibility of contact with water or moisture.
«A» brand of the lubricant Agrinol GD is used to grease the friction by a bookmarks method. The heating for the lubricant is permissible up to the temperature of (50 – 80) °C.
«B» brand of the lubricant Agrinol GD — is a press lubricant, which can be used to grease the friction with a syringe or a mechanical supercharger.
Index name Agrinol GD brand A Agrinol GD brand B
Thickener Na
Operating temperature, min…max, °С – 30 … + 80
Dropping point, °С, not lower than 100
Colloid stability, % of the allocated oil, not more than –
Stability against oxidation, mg KOH / g, not more than 10
Penetration without mixing, mm·10 – 1
at 25 °С
at 75 °С
35 – 70
70 – 95
70 – 220
–
Fraction of total mass, %, not more than
mechanical impurities
water
free alkali in the recalculation of NaOH
0,1
6,0
1,2
 
Relisol, Puma-M Print
Agrinol Relisol   TS U 23.2-30802090-055-2006
Agrinol Relisol М and Agrinol Relisol GS are lubricants intended for greasing railway attrition pairs «wheel-rail». The lubricants are supplied to the zone of bandage combs of a wheel pair with the help of a greasing device with intermittent lubricant supply (Agrinol Relisol М is supplied under pressure)
Agrinol Puma-M          TS U 23.2-30802090-075:2007
The metal plating semi-fluid lubricant Agrinol Puma-M is used for greasing heavily loaded toothed gears in reducers of locomotive engines as well as for increasing durability at the contact of wheel pair combs with rails. The lubricant is placed on wheel combs or cheeks of rails with the help of movable greasing mechanisms. If the lubricant is placed into friction units, method of laying is applied. Agrinol Puma Ml — is summer lubricant, Agrinol Puma Mz is winter lubricant.
Index name Agrinol Relisol-M Agrinol Relisol-GS Agrinol Puma-Ml Аgrinol Puma-Mz
Meets classifications NLGI
DIN 51502		 00
GP00C-30		 000
GP000C-30		 1 / 2
G 1 / 2 G-40		 0 / 00
G 0 / 00 E-40
Thickener Ca Li
Operating temperature, min…max, °С – 30 … + 50 – 40 … + 50 – 40 … + 110 – 45 … + 80
Dropping point, °С, not lower than 70 – 140 –
Penetration at 25 °С, мм·10 – 1 400 – 445 445 – 495 280 – 350 350 – 440
Efficient viscosity at (–30 °С) and medium degree of strain rate 10 с–1), Pa / s, not more than 800 100 – 200 100
Colloid stability % of the separated oil, not more than – 35 –
Tribological characteristics on Four-ball machine at (20 ± 5) °С:
Welding loading, N, not less than
Critical loading, not less than
Deterioration index (196 Н), mm, not more than

1260
560
–

–
–
0,7
 
ZHT-72, ZHT-79L, GTKZ-65 Print
Agrinol ZHT-72   TS U 24.6-30802090-058-2006
Agrinol ZHT-72 is a lubricant used for greasing of car breaking devices of railway rolling stocks (locomotive brake at the rubber friction over metal). The lubricant can be used for greasing of similar equipment of different industries, transport, agriculture.
Agrinol ZHT-79L          TS U 24.6-30802090-059:2007
Is used for car breaking devices of rolling stocks for greasing of rubber and rubber cloth sealing parts of car breaking devices, for greasing of attrition faces «metal — metal» and «metal — rubber» parts and units of break devices.
The lubricant is also used for greasing attrition faces of electric equipment of rolling stocks: in bearings of machines, joinings, all relays, windshield wipers, pressure regulators, in cylinders and sealing glands of rubber pistons of pneumatic drives of current receiver contractors and other electric devices, except cases when leather piston glands are used.
Agrinol GTKZ-65          TS U 24.6-30802090-059:2007
Agrinol GTKZ-65 lubricant is used for greasing the brake equipment and machinery of locomotives, diesel trains, traction railway rolling stock, working with small shear. The main consumers of lubricants are the enterprises and organizations of railway transport, metro, tram economy.
Index name Agrinol ZHT-72 Agrinol ZHT-79L Agrinol CTKZ-65
Meets classifications NLGI
DIN 51502		 –
КSiK-60		 2
КSi 2 K-60		 2 / 3
OG 2 / 3 G-60
Thickener к-Ca Li Li
Operating temperature, min…max, °С –60 … + 120 ( + 150) – 60 … + 120 ( + 150) –30 … + 110
Dropping point, °С, not lower than – – 120
Penetration at 25 °С, мм·10 – 1 – 240 – 290 230 – 300
Effective viscosity. (medium degree of strain rate 10 с–1), Pa / s, not more than 800 (– 55 °С) 800 (– 55 °С) 1500 (– 50 °С)
Shear strength, at 20 °С, Pa, not lower than 50 (50 °С) 250 (50 °С) –
Colloid stability, %, not more than 10 15 40
 
More...